If you’re weighing up a used petrol or diesel and wondering what to check, you’ll learn the most by systematically assessing condition, then matching the car to your real-world use and driving style. Below is a practical checklist for both powertrains—without a blanket recommendation, because different habits and routes call for different priorities.

Key engine checks: petrol vs diesel

  • Cold start and idle: the engine should fire without long cranking and hold a steady idle. On diesels, watch for irregular vibrations and a harsher note; on petrols, look for fluctuating revs and the smell of unburnt fuel.
  • Exhaust smoke: bluish smoke points to oil consumption, thick white to a coolant issue, and black to mixture/fuel problems. On diesels, also watch for black smoke under load.
  • Noise and vibrations: knocking, rattling, or humming can indicate worn components (e.g., pulleys, bearings, injectors, fuel pump, turbo). On diesels, listen for the dual-mass flywheel (if fitted)—uneven shudder at low revs can signal wear.
  • Leaks and fluids: inspect engine joints, valve cover, turbo, and hoses. Oil should be at the correct level and free of metal particles; coolant should be clean, without oily traces.
  • Exhaust system and aftertreatment: on petrols, check the catalytic converter and oxygen sensors (warning lights, exhaust smell). On diesels, pay attention to the DPF (signs of frequent regenerations, warning lights, sluggishness when driving) and EGR (unstable running, smoke).
  • Fuel system: misfire, hesitation, or hard warm starts can point to injectors or the high-pressure pump. On petrols, listen for the in-tank pump; on diesels, also the high-pressure side of the system.

Test drive and diagnostics

  • Acceleration and power delivery: power should arrive linearly, without flat spots. On turbo engines (petrol and diesel), the turbo should pull consistently, without whistling or sudden power drop-offs.
  • Gearbox and clutch: shifts should be clean and predictable; the clutch shouldn’t slip or bite very high. On automatics, test when cold and hot, checking for smooth shifts and no jolts.
  • Warning lights and messages: before starting and after shutting down, check for any warnings on the instrument cluster. A quick scan for stored fault codes can reveal a history of issues.
  • Temperature and cooling: the engine should reach operating temperature and stay stable; cooling fans should engage without excessive roaring.
  • Brakes and suspension: test straight-line braking, tracking, bumps, and any noises from the suspension. Even tire wear can suggest good alignment.

Service history, condition, and signs of use

  • Service documentation: ask to see the service book and receipts. Compare service intervals and recorded work with visible condition (e.g., fresh oil, filters, belt condition by appearance rather than just stated intervals or mileage).
  • Consistency between ad and car: verify the listed equipment, keys, VIN, and the vehicle’s data plates.
  • Visual signs of repairs: mismatched paint, uneven panel gaps, fresh seam sealer, and rust in typical spots can point to past damage or poor repairs.
  • Consumables: the condition of brakes, tires, wiper blades, and the battery can reveal usage patterns and owner care.

Intended use and driving style

  • City routes and short trips: frequent short journeys with stops stress cold starts and exhaust aftertreatment. Pay attention to smooth running at low speeds and how often fans/regenerations kick in.
  • Long trips and heavy loads: if you often drive on motorways or carry heavier loads, check thermal stability, oil/water temperatures under load, turbo behavior, and oil consumption.
  • Duty cycle and maintenance budget: learn the typical service items for the specific engine (belt/chain, injectors, turbo, DPF/catalyst) and plan a realistic budget for routine and unforeseen maintenance.

In the end, there’s no universal answer: align the technical condition of the specific car with your daily routine, routes, and maintenance habits. Need more topics and checklists? Browse all guides.